CustomPartNet
·
November 19, 2026
·
Updated November 19, 2026
Begin by trimming the supplier list to shops that fit your requirements, such as experience with polycarbonate, cleanroom molding capability, or quality certifications like ISO 13485. Location is worth considering too, since it shapes freight cost and lead time. For regulated products and long-term programs, the choice of molder can carry as much weight as the part design. Whenever possible, ask for sample parts similar to yours. A molded sample shows clarity, surface quality, and workmanship in a way a datasheet cannot. Browse our supplier network to compare qualified Texas suppliers, review sample parts, and request quotes.
Injection molding is the most commonly used manufacturing process for plastic parts. It covers a wide range of part sizes and complexity, and it suits medical programs well because it delivers consistent parts in large quantities at a low cost per piece.
Raw plastic, usually in the form of small pellets, is poured into a hopper and drops into the barrel of the injection unit. A reciprocating screw both rotates and slides axially, carrying the material forward while pressure, friction, and heaters around the barrel melt it.
When enough molten plastic has collected at the front of the barrel, the screw moves forward and injects the plastic through the nozzle into the mold. Pressure is held so the cavity is packed as the material begins to cool and solidify.
After the part has cooled, the clamping unit opens the mold and the ejection system releases the part. The mold then closes and the cycle starts again. Cycle times typically run from 2 seconds to 2 minutes, depending on the part.
Thin-walled housings with ribs and bosses on the inside are some of the most common injection molded products, and that description fits many medical device enclosures and covers.
Polycarbonate (PC) is a go-to material for medical parts that need clarity and toughness at the same time:
Very tough, with high impact strength
Transparent, with good optical clarity
Good temperature resistance
Dimensional stability for parts that must fit together precisely
Suitable for many common sterilization methods, depending on the grade
Available in medical and biocompatible grades
Can be colored, or molded in flame-retardant grades for powered devices
The mold is the custom tool that shapes your part. It is usually made of steel or aluminum and is split into two halves, the mold core and the mold cavity. When the mold closes, the space between them forms the part cavity. Molten plastic enters through the sprue, runners, and gates, while cooling channels carry water through the mold to draw heat out of the plastic.
Tooling cost depends on:
Part size and mold base size
Part complexity and feature count
Side-cores, lifters, or unscrewing devices
Number of cavities
Tolerance and surface finish requirements, especially polished optical surfaces
Expected production volume
PC needs good drying before molding, since moisture in the material can cause bubbles and surface defects. Clear parts also show flow marks and sink marks more readily, so a few design habits pay off:
Keep wall thickness uniform, because most molding defects trace back to uneven cooling
Round inside corners to at least the wall thickness to lower stress concentrations
Apply a draft angle of 1° to 2° on walls parallel to the parting direction
Use ribs for stiffness instead of thick walls, with rib thickness at 50 to 60% of the wall
PC injection molding is used throughout the medical industry to produce parts such as:
Diagnostic device housings
Clear covers and viewing windows
Syringe and pen injector components
Fluid connectors and luer fittings
Dialysis and IV system components
Surgical instrument handles and housings
Inhaler and respiratory device parts
Blood filter and oxygenator housings
Handheld monitor enclosures
Lab cartridges and sample containers
Texas suppliers support prototype and production programs for medical OEMs, startups, and contract manufacturers across North America.
PC pairs toughness with transparency, which is hard to find in one material. It holds up to handling and drops, lets users see fluid levels or internal components, and keeps its shape through many common sterilization methods.
Tooling generally falls between $5,000 and $100,000+ depending on part size, complexity, number of cavities, and expected volume. Piece price depends on material weight, cycle time, and machine size. PC costs more per pound than commodity plastics, so reducing wall thickness and part weight can help control cost.
Typical tolerances range from ±0.005" to ±0.020", depending on geometry, material grade, and tooling quality. PC has good dimensional stability, which helps on parts with tight fits. Critical dimensions should be reviewed with your supplier early.
In many cases, yes. Different grades tolerate different methods, such as gamma radiation or ethylene oxide, and repeated steam sterilization can be harder on some grades. Tell your molder how the device will be sterilized so they can recommend the right grade.
Yes. Many suppliers offer molding in controlled environments, along with documentation and traceability suited to medical work. Confirm the cleanliness level and certifications you need before requesting quotes.
It starts with a well-polished mold, proper material drying, and balanced gating and cooling. Your supplier can also suggest where to place gates so any visible marks land outside critical viewing areas.
Yes. Many Texas suppliers offer design for manufacturing feedback, prototyping, tooling, pilot runs, full-scale production, assembly, and packaging. Injection molding is most economical at medium to high volumes, since tooling cost is spread over more parts, and runs commonly range from thousands to millions.
Get competitive quotes from Texas injection molding suppliers experienced with polycarbonate medical parts. Upload a CAD file, drawing, or product concept and receive quotes from qualified suppliers matched to your project.
Get Quotes Now → or Register for a Free Account → to discover new suppliers, create shortlists, and manage RFQs.