CustomPartNet
·
November 17, 2026
·
Updated November 17, 2026
Begin by filtering the supplier list to foundries that meet your requirements, such as cast steel experience, the casting weights they can pour, or industry certifications and testing capability. Location plays a role in freight cost and lead time, especially for heavy castings. For pressure-containing parts and long-term supply agreements, selecting the right foundry can be just as important as the design. Request sample castings similar to your part when you can, since they reveal surface condition and workmanship in a way that numbers alone do not. Browse our supplier network to compare qualified Texas suppliers, examine sample parts, and request quotes.
Sand casting is the most widely used casting process. It forms complex metal parts from nearly any alloy using expendable sand molds, and it handles parts ranging from a couple of ounces up to several tons. Since the mold must be destroyed to remove the casting, production rates are typically low, but the process offers great freedom in size, geometry, and material.
First comes mold-making. Sand is packed around a pattern, a replica of the casting’s external shape, in each half of the mold. Removing the pattern leaves a cavity. Internal passages that the pattern cannot form, such as a valve’s flow path, are created by separate sand cores that are set into the mold.
After the mold halves are closed and clamped, molten metal is ladled from the furnace and poured into the cavity until the cavity and all channels are filled. The metal then cools and solidifies.
Once the cooling time has passed, the sand mold is broken and the casting is removed in a step called shakeout. Excess metal from the channels is trimmed off, and shot blasting may be used to clean remaining sand from internal surfaces.
Steel is a common choice when valve bodies must handle pressure, temperature, and demanding service conditions:
High strength and toughness for pressure-containing parts
Can be cast in carbon, low alloy, and stainless grades
Sand casting handles steel’s high melting temperature of about 2500 °F
Good weldability for repairs and for joining to piping
Responds to heat treatment for tailored properties
Cores allow complex internal flow passages
The pattern is the primary tooling. It is a full size model of the part that leaves an impression in the sand, and it is made slightly larger than the part to allow for shrinkage as the casting cools. Core boxes produce the sand cores that form internal passages. Patterns can be made from wood, plastic, or metal, and a more durable pattern material reduces tooling cost per part over long production runs.
Tooling and casting cost are influenced by:
Part size and weight
Complexity of the external shape
Number and size of cores
Pattern type and material
Expected production quantity
Finishing and machining requirements
Several design practices lead to sound castings:
Keep wall thickness uniform, since thick sections can become hot spots that lead to shrinkage, porosity, or cracking
Round inside corners to at least the wall thickness
Use a 2° to 3° draft on walls parallel to the parting direction
Include 0.0625 to 0.25 in. of machining allowance on sealing faces and flanges
Steel sand casting is used in the oil and gas industry to produce:
Gate valve bodies
Globe and check valve bodies
Ball valve bodies
Valve bonnets and covers
Wellhead and tree components
Pump casings
Flanges and fittings
Manifold and choke bodies
Compressor housings
Pipeline equipment components
Texas suppliers support prototype and production programs for energy OEMs, distributors, and contract manufacturers across North America.
Steel offers the strength and toughness needed to contain pressure and withstand harsh service. Different grades let designers balance strength, temperature capability, and corrosion resistance for the specific application.
Cost depends on part weight, complexity, and quantity. Material cost includes the metal, melting, and the mold and core sand. Tooling cost is driven by the pattern and core boxes. Production cost covers core-making, mold-making, pouring, and cleaning, all of which increase with casting weight. Request quotes at multiple quantities to compare.
Almost always for valve bodies. Sealing surfaces, flange faces, and threaded ports are typically machined to final dimensions. Adding machining allowance to the casting design gives the machinist stock to work with.
Most defects come from the solidification process. Common ones include porosity, hot tearing, unfilled sections, and surface projections. A foundry can reduce these through good gating design, controlled pouring temperature, and uniform wall sections.
Yes. Sand cores form internal holes and passages, and because they are made of sand they can be shaken out of the casting afterward. That is a major advantage for valve bodies with complex flow paths.
Many foundries provide material certifications, heat treatment records, and nondestructive testing options. Confirm the requirements for your application and any applicable industry standards before requesting quotes.
Yes. Many Texas suppliers offer pattern making, casting, heat treating, machining, testing, and finishing, which helps keep a project with one source from pattern to finished part.
Get competitive quotes from Texas sand casting suppliers experienced with cast steel valve bodies. Upload a CAD file, drawing, or product concept and receive quotes from qualified suppliers matched to your project.
Get Quotes Now → or Register for a Free Account → to discover new suppliers, create shortlists, and manage RFQs.