CustomPartNet
·
November 18, 2026
·
Updated November 18, 2026
Start by whittling the supplier list down to shops that fit your project, such as zinc die casting experience, plating or finishing capability, or specific certifications. Location can influence shipping fees and lead time, so keep it in mind. For high-volume hardware programs, the supplier you choose can be as significant as the part design. Ask for sample castings that resemble your product, since a finished sample shows surface smoothness and detail in a way specifications cannot. Browse our supplier network to compare qualified Pennsylvania suppliers, examine sample parts, and request quotes.
Die casting is a manufacturing process that produces geometrically complex metal parts through the use of reusable molds, called dies. The metal, typically a non-ferrous alloy such as aluminum or zinc, is melted in a furnace and then injected into the dies in the die casting machine, where it rapidly cools and solidifies into the final part, called the casting.
Zinc is cast on a hot chamber machine, which is used for alloys with low melting temperatures. The metal sits in an open holding pot inside a furnace, and the molten metal flows into a shot chamber through an inlet. A hydraulically powered plunger then forces the metal through a gooseneck channel and into the die. Typical injection pressures for hot chamber machines range from 1,000 to 5,000 psi.
The plunger stays down to hold pressure while the casting solidifies. After solidification, the plunger retracts, the die opens, and the ejection system pushes the casting out. The die then closes for the next shot.
The excess metal that solidified in the channels, along with any flash, is trimmed from the casting. Total cycle time is very short, typically between 2 seconds and 1 minute.
Zinc alloys are a favorite for hardware because they are easy to cast and finish well:
Easiest of the common die casting alloys to cast
High ductility and good impact strength
Excellent surface smoothness, ideal for painting or plating
Can form very thin walls and fine detail
Long die life due to the low melting point
Cast on a hot chamber machine, which saves cycle time since metal does not need to be ladled
Zinc is susceptible to corrosion, so hardware parts are typically coated, plated, or painted.
The dies are the custom tooling. They consist of two halves, the cover die, mounted on a stationary platen, and the ejector die, mounted on a movable platen. When closed, the dies form the part cavity. Channels in the die include the sprue, runners, gates, overflow wells, and vents, along with cooling channels that carry water or oil through the die to remove heat.
Dies are usually made of high grade tool steel, which is typically good for 100,000 to 150,000 cycles. Steels with low carbon content resist cracking and can be used for up to 1,000,000 cycles. Because zinc melts at a lower temperature than other alloys, it allows longer tooling life.
Tooling cost is influenced by:
Part envelope size and die set size
Projected area and depth of the cavity
Feature count and parting surface
Side-cores and number of side-action directions
Tolerance and surface finish requirements
Production quantity and expected die life
Some design rules for zinc castings:
Keep walls uniform and as thin as the part allows to shorten cycle time
Round inside corners to at least the wall thickness
Apply a draft angle of 0.5° on walls and 1° on inside cores
Minimize external undercuts, since they require side-cores
Remove internal undercuts that need lifters, which often jam in die casting
Zinc die casting is used across the hardware industry to make:
Door handles and lever sets
Lock bodies and cases
Hinges and latches
Cabinet pulls and knobs
Plumbing fixtures and faucet parts
Decorative trim and escutcheons
Window and furniture hardware
Zippers and buckles
Brackets and fasteners
Tool and equipment housings
Pennsylvania suppliers support prototype and production programs for hardware brands, OEMs, and contract manufacturers across North America.
Zinc casts easily, captures fine detail, and produces a smooth surface that takes plating and paint well. That makes it a natural fit for handles, locks, and decorative parts where looks and feel matter.
Cost is shaped by tooling, material, and production. Tooling depends on the die set and the machining of the cavities. Material cost is driven by part weight and zinc price, and production cost depends on the machine rate and cycle time. Because zinc dies last a long time, cost per part tends to drop at high volumes.
Hot chamber machines are used for low melting temperature alloys such as zinc, where the pump can stay in contact with the molten metal. Cold chamber machines are used for higher melting alloys such as aluminum, and the metal is ladled into the machine for each shot. Hot chamber machines can save substantial time.
Usually. Zinc is susceptible to corrosion, so most hardware parts are plated, painted, or coated. The smooth cast surface makes finishing easier and helps produce a high quality appearance.
Zinc is highly ductile and can form very thin walls, often thinner than other die cast alloys. Your supplier can recommend practical wall thicknesses based on the size and geometry of your part.
Common issues include flash, unfilled sections, bubbles, hot tearing, and ejector marks. Many trace back to non-uniform cooling, so uniform walls and good die temperature control help.
Yes. Many Pennsylvania suppliers offer design for manufacturing feedback, tooling, trimming, machining, plating, finishing, and assembly. Die casting is most economical at medium to high volumes, since tooling cost is spread across more parts.
Get competitive quotes from Pennsylvania die casting suppliers experienced with zinc hardware parts. Upload a CAD file, drawing, or product concept and receive quotes from qualified suppliers matched to your project.
Get Quotes Now → or Register for a Free Account → to discover new suppliers, create shortlists, and manage RFQs.